1. Home
  2. England
  3. Cumbria
  4. Westmorland
  5. South Lakeland
  6. Belle Isle

Belle Isle

Island in Westmorland South Lakeland

England

Belle Isle

Windermere Steamboat Museum 1994 This is the original museum that has now been replaced by the new Windermere Jetty Museum. I have yet to visit this new museum but I understand many of the vessels are now shown out of the water to better conserve them and as of mid-2021 several were shown with their engines removed. The two boats seen on the left are Otto (left) of 1896 and Water Viper (right) of 1907.
Windermere Steamboat Museum 1994 Credit: Chris Allen

Belle Isle is a picturesque island located in the southern part of Lake Windermere, Westmorland, England. Stretching across approximately 30 acres, it is the largest of the 18 islands found on this stunning lake. The island is privately owned and has a rich history dating back centuries.

The landscape of Belle Isle offers a delightful mix of lush greenery, woodlands, and manicured gardens, making it a haven for nature lovers. The island's centerpiece is the grand Belle Isle House, a Grade I listed Georgian mansion that commands breathtaking views of the lake and the surrounding fells. The mansion was built in the early 18th century and has served as a residence for various noble families over the years.

Visitors to Belle Isle have the opportunity to explore its well-preserved historic gardens, which feature terraces, ornamental ponds, and a variety of exotic plants. The island also boasts a charming boathouse, where guests can hire rowing boats or take a leisurely stroll along the lakeshore.

In addition to its natural beauty, Belle Isle offers a range of recreational activities. Fishing enthusiasts can try their luck at catching pike, perch, and trout in the lake's crystal-clear waters. There are also numerous walking trails that provide breathtaking views of the surrounding countryside.

Access to Belle Isle is by boat only, adding to its secluded and tranquil atmosphere. The island is a popular destination for those seeking a peaceful retreat or a wedding venue with a touch of elegance. With its stunning landscapes and rich history, Belle Isle truly captures the essence of Lake Windermere's beauty.

Show me another place!

If you have any feedback on the listing, please let us know in the comments section below.

Belle Isle Images

Images are sourced within 2km of 54.361713/-2.9344857 or Grid Reference SD3996. Thanks to Geograph Open Source API. All images are credited.

Windermere Steamboat Museum 1994 This is the original museum that has now been replaced by the new Windermere Jetty Museum. I have yet to visit this new museum but I understand many of the vessels are now shown out of the water to better conserve them and as of mid-2021 several were shown with their engines removed. The two boats seen on the left are Otto (left) of 1896 and Water Viper (right) of 1907.
Windermere Steamboat Museum 1994
This is the original museum that has now been replaced by the new Windermere Jetty Museum. I have yet to visit this new museum but I understand many of the vessels are now shown out of the water to better conserve them and as of mid-2021 several were shown with their engines removed. The two boats seen on the left are Otto (left) of 1896 and Water Viper (right) of 1907.
Windermere Steamboat Museum 1994 - Steam Launch Otto This is the original museum with the vessels afloat in a large covered wet dock. The new Windermere Jetty Museum has several of the vessels displayed on dry land to aid their preservation. Otto was built as a fast launch by Forrestt & sons Ltd. in 1896. It is 45' 6" long overall and of riveted steel construction. The engine is an inverted vertical triple expansion by W Sisson & Co. Ltd. works No. 500 of 1896. The cylinders are 6.25", 8.25" & 10.75" x 7" and it is rated at 100 indicated horsepower. The boiler is a locomotive type built in 1958 by Abbott & Co. of Newark and is pressed to 200 psi.
Windermere Steamboat Museum 1994 - Steam Launch Otto
This is the original museum with the vessels afloat in a large covered wet dock. The new Windermere Jetty Museum has several of the vessels displayed on dry land to aid their preservation. Otto was built as a fast launch by Forrestt & sons Ltd. in 1896. It is 45' 6" long overall and of riveted steel construction. The engine is an inverted vertical triple expansion by W Sisson & Co. Ltd. works No. 500 of 1896. The cylinders are 6.25", 8.25" & 10.75" x 7" and it is rated at 100 indicated horsepower. The boiler is a locomotive type built in 1958 by Abbott & Co. of Newark and is pressed to 200 psi.
Windermere Steamboat Museum 1994 - funnels in a row The original museum before it was replaced by the much delayed Windermere Jetty Museum. The nearest funnel is on Otto of 1896 and the one beyond is Water Viper of 1907.
Windermere Steamboat Museum 1994 - funnels in a row
The original museum before it was replaced by the much delayed Windermere Jetty Museum. The nearest funnel is on Otto of 1896 and the one beyond is Water Viper of 1907.
Windermere Steamboat Museum 1994 - Osprey and Branksome Inside the large covered wet dock that comprised most of the original museum before being replaced by Windermere Jetty Museum. The nearest vessel is Osprey - a cabin/saloon launch built in 1902 by Neil Shepherd at Bowness. it is wood hulled of carvel construction and 45' 6" long overall. The engine is an inverted vertical compound by W Sisson of Gloucester, works No. 591 of 1901 and fitted to this hull in 1981. The cylinders are 5.25" & 8" x 5.5" stroke. The engine was formerly in Water Viper. The boiler is a locomotive type. Branksome is in the background and is also a cabin/saloon launch built in 1896 by George Brockbank at Bowness. Of carvel construction in teak with an overall length of 50'. The engine is an inverted vertical compound by W Sisson of Gloucester, works No. 502 of 1896. The cylinders are 7.5" & 11" x 7". The boiler is a locomotive type built in 1971 by Hunslet & Co. of Leeds.
Windermere Steamboat Museum 1994 - Osprey and Branksome
Inside the large covered wet dock that comprised most of the original museum before being replaced by Windermere Jetty Museum. The nearest vessel is Osprey - a cabin/saloon launch built in 1902 by Neil Shepherd at Bowness. it is wood hulled of carvel construction and 45' 6" long overall. The engine is an inverted vertical compound by W Sisson of Gloucester, works No. 591 of 1901 and fitted to this hull in 1981. The cylinders are 5.25" & 8" x 5.5" stroke. The engine was formerly in Water Viper. The boiler is a locomotive type. Branksome is in the background and is also a cabin/saloon launch built in 1896 by George Brockbank at Bowness. Of carvel construction in teak with an overall length of 50'. The engine is an inverted vertical compound by W Sisson of Gloucester, works No. 502 of 1896. The cylinders are 7.5" & 11" x 7". The boiler is a locomotive type built in 1971 by Hunslet & Co. of Leeds.
Windermere Steamboat Museum 1994 - Osprey and Branksome The original museum before it was replaced by Windermere Jetty Museum. This shows part of the large covered wet dock with the boats afloat. In the new museum many boats are now displayed on dry land, some without engines on board. Of the two closest boats on the right, the left hand funnel is Osprey and the right hand one is Branksome. See - <a href="https://www.geograph.org.uk/photo/6962655">SD4097 : Windermere Steamboat Museum 1994 - Osprey and Branksome</a>
Windermere Steamboat Museum 1994 - Osprey and Branksome
The original museum before it was replaced by Windermere Jetty Museum. This shows part of the large covered wet dock with the boats afloat. In the new museum many boats are now displayed on dry land, some without engines on board. Of the two closest boats on the right, the left hand funnel is Osprey and the right hand one is Branksome. See - SD4097 : Windermere Steamboat Museum 1994 - Osprey and Branksome
Windermere Steamboat Museum 1994 - engine on board Swallow Swallow is a cabin/saloon launch built in 1911 by Neil Shepherd at Bowness and measuring 45' 6" overall length. The engine is an inverted vertical triple expansion by W Sisson of Gloucester, works No. 1032 of 1911. The cylindersw are 4.5", 6" & 8" x 5.5" stroke and fitted with piston valves operated by radial valve gear. The crosshead guides are Laird type. To the right is one end of the locomotive type boiler with a side mounted fire door. This was built in 1990 by H A McEwen of Cowling near Keighley.
Windermere Steamboat Museum 1994 - engine on board Swallow
Swallow is a cabin/saloon launch built in 1911 by Neil Shepherd at Bowness and measuring 45' 6" overall length. The engine is an inverted vertical triple expansion by W Sisson of Gloucester, works No. 1032 of 1911. The cylindersw are 4.5", 6" & 8" x 5.5" stroke and fitted with piston valves operated by radial valve gear. The crosshead guides are Laird type. To the right is one end of the locomotive type boiler with a side mounted fire door. This was built in 1990 by H A McEwen of Cowling near Keighley.
Windermere Steamboat Museum 1994 - engine on board Otto Otto was built as a fast launch by Forrestt & sons Ltd. in 1896. It is 45' 6" long overall and of riveted steel construction. The engine is an inverted vertical triple expansion by W Sisson & Co. Ltd. works No. 500 of 1896. The cylinders are 6.25", 8.25" & 10.75" x 7" and it is rated at 100 indicated horsepower. The cylinders have piston valves operated by radial valve gear and the crosshead guides are Laird type. The boiler is a locomotive type built in 1958 by Abbott & Co. of Newark and is pressed to 200 psi.
Windermere Steamboat Museum 1994 - engine on board Otto
Otto was built as a fast launch by Forrestt & sons Ltd. in 1896. It is 45' 6" long overall and of riveted steel construction. The engine is an inverted vertical triple expansion by W Sisson & Co. Ltd. works No. 500 of 1896. The cylinders are 6.25", 8.25" & 10.75" x 7" and it is rated at 100 indicated horsepower. The cylinders have piston valves operated by radial valve gear and the crosshead guides are Laird type. The boiler is a locomotive type built in 1958 by Abbott & Co. of Newark and is pressed to 200 psi.
Windermere Steamboat Museum 1994 - boiler on Otto Otto was built as a fast launch by Forrestt & sons Ltd. in 1896. It is 45' 6" long overall and of riveted steel construction. The engine is an inverted vertical triple expansion by W Sisson & Co. Ltd. works No. 500 of 1896. The cylinders are 6.25", 8.25" & 10.75" x 7" and it is rated at 100 indicated horsepower. The boiler is a locomotive type built in 1958 by Abbott & Co. of Newark and is pressed to 200 psi. The sharp eyed amongst you may note that although everything appears in order, the gauge glasses are missing.
Windermere Steamboat Museum 1994 - boiler on Otto
Otto was built as a fast launch by Forrestt & sons Ltd. in 1896. It is 45' 6" long overall and of riveted steel construction. The engine is an inverted vertical triple expansion by W Sisson & Co. Ltd. works No. 500 of 1896. The cylinders are 6.25", 8.25" & 10.75" x 7" and it is rated at 100 indicated horsepower. The boiler is a locomotive type built in 1958 by Abbott & Co. of Newark and is pressed to 200 psi. The sharp eyed amongst you may note that although everything appears in order, the gauge glasses are missing.
Windermere Steamboat Museum 1994 - engine on board Osprey Osprey - a cabin/saloon launch built in 1902 by Neil Shepherd at Bowness. it is wood hulled of carvel construction and 45' 6" long overall. The engine is an inverted vertical compound by W Sisson of Gloucester, works No. 591 of 1901 and fitted to this hull in 1981. The cylinders are 5.25" & 8" x 5.5" stroke. The engine was formerly in Water Viper. The boiler is a locomotive type that is just visible to the right and is side fired.
Windermere Steamboat Museum 1994 - engine on board Osprey
Osprey - a cabin/saloon launch built in 1902 by Neil Shepherd at Bowness. it is wood hulled of carvel construction and 45' 6" long overall. The engine is an inverted vertical compound by W Sisson of Gloucester, works No. 591 of 1901 and fitted to this hull in 1981. The cylinders are 5.25" & 8" x 5.5" stroke. The engine was formerly in Water Viper. The boiler is a locomotive type that is just visible to the right and is side fired.
Windermere Steamboat Museum 1994 - Lady Elizabeth and Kittiwake Lady Elizabeth is on the left and is an open launch built by Monarch Co. in the USA. It was found by George Pattinson in a derelict state in the 1950s and was restored with the current steam plant fitted. It is a mere 18' long overall. The engine is an inverted vertical single cylinder Stuart Turner 5A design. This is a favourite of model engineers and the slide valve cylinder is 2.25" x 2". The boiler is a Kitchen and Perkins patent water-tube design built in 1910 by the Lune Valley Engineering Co. , Lancaster. On the right is Kittiwake - a cabin/saloon launch built in 1898 by T W Hayton at Bowness. It is 40' long overall. It has a locomotive type boiler and an inverted vertical triple expansion steam engine.
Windermere Steamboat Museum 1994 - Lady Elizabeth and Kittiwake
Lady Elizabeth is on the left and is an open launch built by Monarch Co. in the USA. It was found by George Pattinson in a derelict state in the 1950s and was restored with the current steam plant fitted. It is a mere 18' long overall. The engine is an inverted vertical single cylinder Stuart Turner 5A design. This is a favourite of model engineers and the slide valve cylinder is 2.25" x 2". The boiler is a Kitchen and Perkins patent water-tube design built in 1910 by the Lune Valley Engineering Co. , Lancaster. On the right is Kittiwake - a cabin/saloon launch built in 1898 by T W Hayton at Bowness. It is 40' long overall. It has a locomotive type boiler and an inverted vertical triple expansion steam engine.
Windermere Steamboat Museum 1994 - engine on Branksome I had to climb across Osprey to get this view and I had the permission of the museum staff to do so. This museum has now been replaced by Windermere Jetty Museum and several of the boats are now displayed on dry land rather than in the covered wet dock. Branksome is a cabin/saloon launch built in 1896 by George Brockbank at Bowness. Of carvel construction in teak with an overall length of 50'. The engine is an inverted vertical compound by W Sisson of Gloucester, works No. 502 of 1896. The cylinders are 7.5" & 11" x 7". The boiler is a locomotive type built in 1971 by Hunslet & Co. of Leeds. The boiler's backhead is seen on the right with two injectors and two gauge glasses. The fire hole is not seen as the boiler is side fired.
Windermere Steamboat Museum 1994 - engine on Branksome
I had to climb across Osprey to get this view and I had the permission of the museum staff to do so. This museum has now been replaced by Windermere Jetty Museum and several of the boats are now displayed on dry land rather than in the covered wet dock. Branksome is a cabin/saloon launch built in 1896 by George Brockbank at Bowness. Of carvel construction in teak with an overall length of 50'. The engine is an inverted vertical compound by W Sisson of Gloucester, works No. 502 of 1896. The cylinders are 7.5" & 11" x 7". The boiler is a locomotive type built in 1971 by Hunslet & Co. of Leeds. The boiler's backhead is seen on the right with two injectors and two gauge glasses. The fire hole is not seen as the boiler is side fired.
Windermere Steamboat Museum 1994 - engine on Kittiwake Kittiwake is a cabin/saloon launch built in 1898 by T W Hayton at Bowness. It is 40' long overall. It has a locomotive type boiler and an inverted vertical triple expansion steam engine. This shows the engine that is by W Sisson & Co. of Gloucester, works No. 611 of 1901. The cylinders are 5", 6.25" & 8" x 5.5" with piston valves and radial valve gear. The boiler is to the left and is a locomotive type built in 1984 by H A McEwen of Cowling near Keighley and pressed to 200 psi.
Windermere Steamboat Museum 1994 - engine on Kittiwake
Kittiwake is a cabin/saloon launch built in 1898 by T W Hayton at Bowness. It is 40' long overall. It has a locomotive type boiler and an inverted vertical triple expansion steam engine. This shows the engine that is by W Sisson & Co. of Gloucester, works No. 611 of 1901. The cylinders are 5", 6.25" & 8" x 5.5" with piston valves and radial valve gear. The boiler is to the left and is a locomotive type built in 1984 by H A McEwen of Cowling near Keighley and pressed to 200 psi.
Windermere Steamboat Museum 1994 - steam launch Kittiwake Kittiwake is a cabin/saloon launch built in 1898 by T W Hayton at Bowness. It is 40' long overall. It has a locomotive type boiler and an inverted vertical triple expansion steam engine. This shows part of the engine on the right that is by W Sisson & Co. of Gloucester, works No. 611 of 1901. The cylinders are 5", 6.25" & 8" x 5.5" with piston valves and radial valve gear. The boiler is in the centre and is a side fired locomotive type built in 1984 by H A McEwen of Cowling near Keighley and pressed to 200 psi.
Windermere Steamboat Museum 1994 - steam launch Kittiwake
Kittiwake is a cabin/saloon launch built in 1898 by T W Hayton at Bowness. It is 40' long overall. It has a locomotive type boiler and an inverted vertical triple expansion steam engine. This shows part of the engine on the right that is by W Sisson & Co. of Gloucester, works No. 611 of 1901. The cylinders are 5", 6.25" & 8" x 5.5" with piston valves and radial valve gear. The boiler is in the centre and is a side fired locomotive type built in 1984 by H A McEwen of Cowling near Keighley and pressed to 200 psi.
Windermere Steamboat Museum 1994 - engine on board Dolly Steam Launch Dolly - the oldest mechanically propelled vessel in the world. However, it is currently (2021) not in operable condition. This vessel is thought to have been built c1850 and is a cabin/saloon launch with an overall length of 41'. It spent a considerable part of its life in a sunken condition and was salvaged in 1962, being returned to steam in 1965. This shows her inverted vertical single cylinder engine with a 7" x 7" slide valve cylinder and Stephenson link reversing gear.
Windermere Steamboat Museum 1994 - engine on board Dolly
Steam Launch Dolly - the oldest mechanically propelled vessel in the world. However, it is currently (2021) not in operable condition. This vessel is thought to have been built c1850 and is a cabin/saloon launch with an overall length of 41'. It spent a considerable part of its life in a sunken condition and was salvaged in 1962, being returned to steam in 1965. This shows her inverted vertical single cylinder engine with a 7" x 7" slide valve cylinder and Stephenson link reversing gear.
Windermere Steamboat Museum 1994 - Steam Launch Branksome I had to climb across Osprey to get this view and I had the permission of the museum staff to do so. This museum has now been replaced by Windermere Jetty Museum and several of the boats are now displayed on dry land rather than in the covered wet dock. Branksome is a cabin/saloon launch built in 1896 by George Brockbank at Bowness. Of carvel construction in teak with an overall length of 50'. The engine is an inverted vertical compound by W Sisson of Gloucester, works No. 502 of 1896. The cylinders are 7.5" & 11" x 7". The boiler is a locomotive type built in 1971 by Hunslet & Co. of Leeds. It is seen to the right of the engine and its side mounted fire hole is clearly seen below the brass railing. The shiny copper fitting seen below the life belt on the right is the steam heated 'Windermere kettle'.
Windermere Steamboat Museum 1994 - Steam Launch Branksome
I had to climb across Osprey to get this view and I had the permission of the museum staff to do so. This museum has now been replaced by Windermere Jetty Museum and several of the boats are now displayed on dry land rather than in the covered wet dock. Branksome is a cabin/saloon launch built in 1896 by George Brockbank at Bowness. Of carvel construction in teak with an overall length of 50'. The engine is an inverted vertical compound by W Sisson of Gloucester, works No. 502 of 1896. The cylinders are 7.5" & 11" x 7". The boiler is a locomotive type built in 1971 by Hunslet & Co. of Leeds. It is seen to the right of the engine and its side mounted fire hole is clearly seen below the brass railing. The shiny copper fitting seen below the life belt on the right is the steam heated 'Windermere kettle'.
Windermere Jetty Museum - engine from cargo barge Raven In the entrance foyer is this large (about 7' tall) inverted vertical single cylinder engine from the former cargo barge Raven. The engine was built in 1871 by A Campbell & Co. of Glasgow. The slide valve cylinder is 8" x 12" and there is Stephenson link reversing gear. It gave the vessel a speed of 10 mph. Raven is now on dry land outside the museum. It was built in 1871 by T B Seath & Co. at Rutherglen and is 71' long overall with a displacement of 82,000 lbs.
Windermere Jetty Museum - engine from cargo barge Raven
In the entrance foyer is this large (about 7' tall) inverted vertical single cylinder engine from the former cargo barge Raven. The engine was built in 1871 by A Campbell & Co. of Glasgow. The slide valve cylinder is 8" x 12" and there is Stephenson link reversing gear. It gave the vessel a speed of 10 mph. Raven is now on dry land outside the museum. It was built in 1871 by T B Seath & Co. at Rutherglen and is 71' long overall with a displacement of 82,000 lbs.
Windermere Jetty Museum - engine from steam launch Dolly Steam Launch Dolly - the oldest mechanically propelled vessel in the world. However, it is currently (2021) not in operable condition and its engine is displayed out of the hull. This vessel is thought to have been built c1850 and is a cabin/saloon launch with an overall length of 41'. It spent a considerable part of its life in a sunken condition and was salvaged in 1962, being returned to steam in 1965. This shows her inverted vertical single cylinder engine with a 7" x 7" slide valve cylinder and Stephenson link reversing gear.
Windermere Jetty Museum - engine from steam launch Dolly
Steam Launch Dolly - the oldest mechanically propelled vessel in the world. However, it is currently (2021) not in operable condition and its engine is displayed out of the hull. This vessel is thought to have been built c1850 and is a cabin/saloon launch with an overall length of 41'. It spent a considerable part of its life in a sunken condition and was salvaged in 1962, being returned to steam in 1965. This shows her inverted vertical single cylinder engine with a 7" x 7" slide valve cylinder and Stephenson link reversing gear.
Windermere Jetty Museum - Dolly and Kittiwake This shows one of the museum galleries with two vessels displayed on dry land and with their engines separate from the hulls (presumably to reduce hull loadings and allow the public to see the engines). On the left is steam launch Dolly. The oldest mechanically propelled vessel in the world. However, it is currently (2021) not in operable condition. This vessel is thought to have been built c1850 and is a cabin/saloon launch with an overall length of 41'. It spent a considerable part of its life in a sunken condition and was salvaged in 1962, being returned to steam in 1965. On the right is steam launch Kittiwake. Its triple expansion engine is displayed in front. Kittiwake is a cabin/saloon launch built in 1898 by T W Hayton at Bowness. It is 40' long overall. It has a locomotive type boiler and an inverted vertical triple expansion steam engine. The engine is by W Sisson & Co. of Gloucester, works No. 611 of 1901. The cylinders are 5", 6.25" & 8" x 5.5" with piston valves and radial valve gear. On the racking to the left is the loose triple expansion engine from steam launch Swallow.
Windermere Jetty Museum - Dolly and Kittiwake
This shows one of the museum galleries with two vessels displayed on dry land and with their engines separate from the hulls (presumably to reduce hull loadings and allow the public to see the engines). On the left is steam launch Dolly. The oldest mechanically propelled vessel in the world. However, it is currently (2021) not in operable condition. This vessel is thought to have been built c1850 and is a cabin/saloon launch with an overall length of 41'. It spent a considerable part of its life in a sunken condition and was salvaged in 1962, being returned to steam in 1965. On the right is steam launch Kittiwake. Its triple expansion engine is displayed in front. Kittiwake is a cabin/saloon launch built in 1898 by T W Hayton at Bowness. It is 40' long overall. It has a locomotive type boiler and an inverted vertical triple expansion steam engine. The engine is by W Sisson & Co. of Gloucester, works No. 611 of 1901. The cylinders are 5", 6.25" & 8" x 5.5" with piston valves and radial valve gear. On the racking to the left is the loose triple expansion engine from steam launch Swallow.
Show me another place!

Belle Isle is located at Grid Ref: SD3996 (Lat: 54.361713, Lng: -2.9344857)

Administrative County: Cumbria

District: South Lakeland

Police Authority: Cumbria

What 3 Words

///flicks.deprives.rabble. Near Windermere, Cumbria

Nearby Locations

Fir Holme Hartley Wife Curlew Crag Cockshott Point Snake Holme Belle Isle

Related Wikis

Belle Isle (Windermere)
Belle Isle (Windermere)

Belle Isle is the largest of 18 islands on Windermere, a mere in the English Lake District, and the only one ever to have been inhabited. It is 1 km in...

Windermere
Windermere

Windermere (sometimes tautologically called Lake Windermere to distinguish it from the nearby town of Windermere) is a ribbon lake in Cumbria, England...

Windermere Way
Windermere Way

The Windermere Way is a 45-mile circuit of Windermere, a lake in the English Lake District. The route is wholly within the Lake District National Park...

St Martin's Church, Bowness-on-Windermere
St Martin's Church, Bowness-on-Windermere

St Martin's Church stands in the centre of the town of Bowness-on-Windermere, Cumbria, England. It is an active Anglican parish church in the deanery of...

Windermere Ferry
Windermere Ferry

The Windermere Ferry is a vehicular cable ferry which crosses Windermere, a lake in the English county of Cumbria. The ferry route forms part of the B5285...

New Hall Inn
New Hall Inn

The New Hall Inn, also known as the Hole in t'Wall, is the oldest public house in Bowness-on-Windermere, and is a Grade II listed building. == History... ==

Bowness-on-Windermere
Bowness-on-Windermere

Bowness-on-Windermere is a town and former civil parish, now in the parish of Windermere and Bowness, in the Westmorland and Furness district, in the ceremonial...

Hawkshead and Claife
Hawkshead and Claife

Hawkshead and Claife is a National Trust property made up of much of the town of Hawkshead and surrounding Claife Woodlands in Cumbria, England. Overlooking...

Nearby Amenities

Located within 500m of 54.361713,-2.9344857
Source: Landsat photo
Lat/Long: 54.3611064/-2.9286454
OpenStreetMap
Google Maps
Source: Landsat photo
Lat/Long: 54.360086/-2.929705
OpenStreetMap
Google Maps
Source: Landsat photo
Lat/Long: 54.3599561/-2.9304693
OpenStreetMap
Google Maps
Source: Landsat photo
Lat/Long: 54.3601072/-2.9311819
OpenStreetMap
Google Maps
Source: Landsat photo
Lat/Long: 54.3599786/-2.9315684
OpenStreetMap
Google Maps
Source: Landsat photo
Lat/Long: 54.3598202/-2.9411775
OpenStreetMap
Google Maps
Source: Landsat photo
Lat/Long: 54.3599757/-2.9413461
OpenStreetMap
Google Maps
Source: Landsat photo
Lat/Long: 54.3604007/-2.941369
OpenStreetMap
Google Maps
Source: Landsat photo
Lat/Long: 54.3612723/-2.9420084
OpenStreetMap
Google Maps
Source: Landsat photo
Lat/Long: 54.3619095/-2.9420001
OpenStreetMap
Google Maps
Bus Stop
Glebe Road Car Park
Bench: no
Bus: yes
Naptan AtcoCode: 090079734203
Naptan Bearing: N
Naptan CommonName: Glebe Road Car Park
Naptan Indicator: near
Naptan Landmark: Oaks Cafe
Naptan NaptanCode: cumdpwad
Naptan Street: Glebe Road
Naptan Verified: no
Note: appears to be no services using this stop as of 18 May 2010
Public Transport: platform
Shelter: no
Source: naptan_import
Lat/Long: 54.361586/-2.9269714
OpenStreetMap
Google Maps
Bench
Source: survey
Lat/Long: 54.3586474/-2.9302433
OpenStreetMap
Google Maps
Cockshott Point
Alt Name: Cockshot Point
Natural: cape
Operator: National Trust
Place: locality
Source: survey
Lat/Long: 54.3597279/-2.9312116
OpenStreetMap
Google Maps
Bench
Source: survey
Lat/Long: 54.3589974/-2.930247
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3634944/-2.9282826
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3633147/-2.9280064
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3630521/-2.9280493
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.36361/-2.9285991
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.36356/-2.9289183
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3633303/-2.929216
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3631177/-2.9292616
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3628708/-2.9291409
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3628021/-2.9287493
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3628802/-2.9282826
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3603311/-2.9313365
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3603531/-2.9316243
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3602213/-2.9320389
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3600875/-2.9323096
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3598559/-2.9324912
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3595904/-2.9325426
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3593747/-2.9323987
OpenStreetMap
Google Maps
Bouy: yes
Lat/Long: 54.3592549/-2.9321178
OpenStreetMap
Google Maps
Source: Landsat photo
Lat/Long: 54.3618761/-2.9272569
OpenStreetMap
Google Maps
Restaurant
Addr City: Bowness-on-Windermere
Addr Place: Windermere Quays
Addr Postcode: LA23 3HE
Addr Street: Glebe Road
Lat/Long: 54.360885/-2.9282295
OpenStreetMap
Google Maps
Nightclub
The Wheelhouse
Addr City: Bowness-on-Windermere
Addr Postcode: LA23 3HE
Addr Street: Glebe Road
Fhrs Id: 328801
Level: 1
Opening Hours: Mo 23:00-03:00, Fr-Sa 23:00-03:00
Website: https://www.wheelhousebowness.co.uk/
Lat/Long: 54.3613648/-2.9277769
OpenStreetMap
Google Maps
Artwork Type: sculpture
Note: wishing well
Tourism: artwork
Lat/Long: 54.3618367/-2.9269495
OpenStreetMap
Google Maps
Defibrillator
Emergency: defibrillator
Lat/Long: 54.360816/-2.9285283
OpenStreetMap
Google Maps
Boat Rental
Windermere Quays Boat Hire
Motorboat Rental: yes
Operator: Windermere Quays
Website: https://www.aquaticboatcentres.com/boat-hire/
Lat/Long: 54.3609677/-2.9289007
OpenStreetMap
Google Maps
Cumbria Spas
Addr City: Bowness-on-Windermere
Addr Place: Windermere Quays
Addr Postcode: LA23 3HE
Addr Street: Glebe Road
Shop: swimming_pool
Website: https://cumbriaspas.co.uk/
Lat/Long: 54.3608626/-2.928348
OpenStreetMap
Google Maps
Man Made: flagpole
Lat/Long: 54.3612187/-2.9278063
OpenStreetMap
Google Maps
Man Made: flagpole
Lat/Long: 54.3611644/-2.9278979
OpenStreetMap
Google Maps
Waste Basket
Lat/Long: 54.3604826/-2.9282391
OpenStreetMap
Google Maps
Bench
Backrest: yes
Lat/Long: 54.3595969/-2.9288667
OpenStreetMap
Google Maps
Bench
Backrest: yes
Material: plastic
Lat/Long: 54.3599907/-2.9282373
OpenStreetMap
Google Maps
Bench
Backrest: yes
Material: plastic
Lat/Long: 54.3599308/-2.928057
OpenStreetMap
Google Maps
The data included in this document is from www.openstreetmap.org. The data is made available under ODbL.
Lingy Holm Westmorland
Ramp Holme Westmorland

Have you been to Belle Isle?

Leave your review of Belle Isle below (or comments, questions and feedback).

© 2024 UK Place Database | Privacy